This article is the first in a series that will look into the risks any user of laboratory services (growers, processors or dispensary owners) will face from the quality systems in place in the laboratory. I will discuss specific risk areas in clear and understandable language so as to not obscure the substance of the article series with abbreviations and nomenclature that is not familiar with the reader. Subjects of the articles that follow will focus on the specific laboratory certification or accreditation requirements and how the user may find out if their risks are addressed. As these articles are meant to be interactive with the reader, users are encouraged to send questions or suggested topics to the author.

This article will be an introduction to the typical laboratory process that generates the “paperwork wall” and how it might impact the user.My experience with laboratory certification or accreditation (difference between the two discussed later in this article) comes from over 30+ years in the environmental chemistry field. My experiences include working under the Clean Water Act, Safe Drinking Water Act, FIFRA (pesticides) and ISO 17025 laboratory analyses and laboratory management. I have also received training to perform ISO 17025 and EPA Drinking Water audits. During this time I have been audited as a laboratory analyst/laboratory manager and have performed audits.

As such, I can open up the laboratory structure beyond the sterile “paperwork wall” that has been constructed to allow the user to see the quality of data that is used in final reports that can wreak havoc. This article will be an introduction to the typical laboratory process that generates the “paperwork wall” and how it might impact the user.

One of the common misconceptions that a user has with a “certified or accredited” laboratory is that procession of a certificate indicates that ALL laboratory analyses produced are accurate and precise. I liken this to the “paperwork wall” that laboratories produce when the user questions any results reported to them. The laboratory management assumes that they have answered the user complaint (i.e. a certified/accredited laboratory cannot make a mistake) and the user will not pursue further questions once the certificate is produced.Accreditation does not guarantee that the laboratory personnel can perform the analyses the user is paying for; just that the laboratory’s paperwork has been audited.

First off, let’s look at what the difference between the terms certified laboratory vs. accredited laboratory. These simple words mean specifically different types of laboratories. According to the NIST National Voluntary Laboratory Accreditation Program (NVLAP):

  • Certification is used for verifying that personnel have adequate credentials to practice certain disciplines, as well as for verifying that products meet certain requirements.
  • Accreditation is used to verify that laboratories have an appropriate quality management system and can properly perform certain test methods (e.g., ANSI, ASTM, and ISO test methods) and calibration parameters according to their scopes of accreditation.

So, how does that impact the user?

  • If your state or 3rd party certificate only accredits a laboratory, then the accreditation agency only inspects the laboratory’s quality program as it applies to written documents and static equipment. (e.g. The quality manual is written and the standard operating procedures (SOPs) are in place).
  • Accreditation does not guarantee that the laboratory personnel can perform the analyses the user is paying for; just that the laboratory’s paperwork has been audited.
  • Certification on the other hand says that the laboratory personnel are qualified to perform the laboratory analyses and that the final laboratory results meet specific (certain) requirements. In other words, the laboratory’s quality plan and SOPs are met.

There are three different paths that are utilized by state cannabis control agencies to accredit or certify a cannabis laboratory.

  • ISO 17025: The ISO laboratory quality standard for laboratory accreditation is the most broadly used. ISO 17025 is an international standard and its implementation in the United States is regulated by ILAC. There are three 3rd party companies that audit for and award ISO 17025 accreditation certificates. They are Perry Johnson Laboratory Accreditation Inc., ANAB and A2LA.
  • TNI: The NELAC Institute standards are utilized by one state to handle their cannabis laboratory accreditation.
  • States: Some states have tried to blend an ISO 17025 requirement with their own state’s certification requirements to produce a mixed accreditation-certification program. But, this type of program may rely on two or more agencies (e.g. ISO 17025 3rd party auditors communicating with state auditors) to cover all specific laboratory areas.

PJLAIn two of the paths above, the final result is that the laboratory receives accreditation. That means that only the quality management system and the scope (e.g. SOPS, laboratory instruments, etc.) have been audited, not the laboratory personnel or their capabilities. The third pathway may produce a certified laboratory or may not.

To provide an example of where an accredited laboratory followed their paperwork but produced inadequate results:

  • I received a laboratory report for organic chemical analyses of a client’s process.
    • The laboratory results placed the user in noncompliance with the state and federal regulatory limits.
    • But, the laboratory result contained data flags (e.g. additional information that explains why the laboratory result failed the laboratory’s quality requirements).
    • The laboratory still received payment from the user as the laboratory performed the analyses.
  • I had to explain to the regulatory agency that some of the data flags when investigated showed:
    • The laboratory failed to use the approved analytical method.
    • The detection level for the regulatory chemical was so low that the laboratory had no instrument capable to see those chemicals at the concentrations reported by the laboratory.
  • The state regulators accepted the explanation I provided and the user was no longer under a regulatory administrative order.
  • But, when I presented this information to the accreditation agency that accredited this laboratory I was informed:
    • The laboratory flagged the data so it can be reported to the user.
    • If the user wanted more from the laboratory, then the user will have to outline their specific requirement in a quality contract with the laboratory. (i.e. If the laboratory identifies the problems then they can report the data no matter what happens to the user).

So now, what is being done behind the “paperwork wall”? Areas such as those listed below can impact the results received by the user.

  • Laboratory quality culture: What does the laboratory staff think about quality in their normal daily work?
  • Laboratory staff competence: What is the level of training and real world competence of the staff that actually works on the analyses?
  • Laboratory capabilities: Does the laboratory actually have the laboratory instruments and equipment that can perform the analyses the user needs?
  • Laboratory quality control parameters: What is in the quality manual and does it make sense?
  • Laboratory analytical method validation: Are the analytical methods used by the laboratory validated by approved statistical procedures?

What should the user have in place to limit their risks from laboratory analyses?

  • Failsafe sampling preparation plans: Make sure the user samples for the laboratory are collected correctly.
  • Failsafe’s on laboratory sample reports: Protect the user from bad laboratory reports.
  • User auditing of the laboratory: Go to the laboratory and see if the laboratory can pass muster.

What’s Next: The next article will go behind the laboratory “paperwork wall” to detail the culture that impacts the user results negatively and how that can be recognized. Follow-up articles will help users developing quality plans that identify risks and how to limit them.

The post Quality Plans for Lab Services: Managing Risks as a Grower, Processor or Dispensary appeared first on Cannabis Industry Journal.

CBD Oils | Growing Cannabis | CBD For Anxiety | CBD Oil Benefits | CBD Oils Cancer Fighting | Effects of CBD Oil | CBD Oil For Pain | CBD Oil For Pain | Vape Pens | Vape Pen Starter Kit | Vaporite Pen | Vapir Pen | Vapen | Sutra Pen | Pulsar Pen | Pax Pen | Kandy Pens | Greco Science Pens | Exxus Pens | Dr Dabber Pens | Dipstick Pens | Davinci Pens | Atmos Pens | Arizer Pens | Zephyr Pens | White Rhino Pens | Volcano Pens | Viva La Vape Pens |  

1. What is CBD? What is CBD Oil?

Cannabidiol (CBD) is a naturally occurring constituent of industrial hemp/cannabis. Its formula is C21H30O2 and it has a molecular mass of 314.4636. It is the most abundant non-psychoactive cannabinoid found in cannabis, and is being scientifically investigated for various reasons.

CBD oil is a cannabis oil (whether derived from marijuana or industrial hemp, as the word cannabis is the latin genus name for both) that has significant amounts of cannabidiol (CBD) contained within it. Our CBD products and extracts are derived from industrial hemp, so they could be considered CBD-rich hemp oil, hemp derived CBD oil, CBD-rich cannabis oil, or plainly “hemp extracts” since they typically contain much more than just CBD. Again, cannabis doesn’t mean marijuana, but is the genus name, and general umbrella term which all forms of marijuana and hemp fall under. The form of cannabis we use for our CBD and hemp extracts is industrial hemp; we do not sell marijuana.

2. If a hemp extract is 40% cannabinoids, what’s the other 60%? What’s in your hemp extracts besides the naturally occurring cannabinoids?

Our Kentucky hemp extracts contain over 80 different phyto-cannabinoids such as cannabidiol (CBD), CBC, CBG, CBN, etc.. In addition to the cannabinoids naturally present in our agricultural hemp extracts, there are also many other types of natural molecules and phyto-chemical compounds such as amino acids, carbohydrates, vitamins (including B1, B2, B6, D), fatty acids (including omega 3 & 6), trace minerals (including iron, zinc, calcium, magnesium, potassium), beta-carotene, chlorophyll, flavanoids, ketones, nitrogenous compounds, alkanes, glycosides, pigments, water, and terpenes. The most common terpenes in our hemp extracts are Myrcene, Beta-caryophyllene, Terpinolene, Linalool, alpha-Pinene, beta-Pinene, Nerolidol og Phytol, trans-alpha-Bergamotene, Limonene/ beta-Phellandrene (Co-elution), and alpha-Humulene.

3. What’s the difference between Hemp and Marijuana?

Scientifically, industrial Hemp and Marijuana are the same plant, with a genus and species name of Cannabis Sativa. They have a drastically different genetic profile though. Industrial Hemp is always a strain of Cannabis sativa, while marijuana can be Cannabis sativa, Cannabis indica, or Cannabis ruderalis. The major difference is how industrial hemp has been bred compared to a marijuana form of Cannabis sativa. organic hemp seedsTypically speaking, industrial hemp is very fibrous, with long strong stalks, and barely has any flowering buds, while a marijuana strain of Cannabis sativa will be smaller, bushier, and full of flowering buds. However, newer industrial hemp varieties in the USA are being bred to have more flowers and higher yields of cannabinoids and terpenes, such as our Kentucky hemp we’re now using!

99% of the time marijuana has a high amount of THC and only a very low amount of CBD. Hemp, on the other hand, naturally has a very high amount of CBD in most instances, and only a trace amount of THC. Fortunately, the cannabinoid profile of hemp is ideal for people looking for benefits from cannabis without the ‘high.’ Hemp is used for making herbal supplements, food, fiber, rope, paper, bricks, oil, natural plastic, and so much more, whereas marijuana is usually used just recreationally, spiritually, and medicinally. The term cannabis oil can refer to either a marijuana or hemp derived oil, since marijuana and hemp are two different forms of cannabis.

In the USA the legal definition of “industrial hemp,” per Section 7606 of the Agricultural Appropriations Act of 2014, is “INDUSTRIAL HEMP — The term ‘‘industrial hemp’’ means the plant Cannabis sativa L. and any part of such plant, whether growing or not, with a delta-9 tetrahydrocannabinol concentration of not more than 0.3 percent on a dry weight basis.”

4. Are hemp derived cannabinoids such as CBD as good as CBD from marijuana?

The short answer is yes. CBD is CBD, whether from marijuana or hemp. Most marijuana has a very low non-psychoactive cannabinoid profile (like CBD, CBC, CBG), so most of the time hemp would be much more preferable for anything besides THC. Marijuana is usually very high in THC (gives people the high) but usually very low in other non-psychoactive cannabinoids.

Nowadays in the USA, many farmers are growing industrial hemp flowers that are just as beautiful, odor-producing, and terpene rich as the best marijuana strains, such as our partnered farmers in Kentucky.

5. Why don’t you source your Hemp and CBD from within Colorado?

colorado growing operationWe feel that the hemp program in Kentucky is more well suited for our company in regards to growing hemp, and that because it’s 100% compliant with Section 7606 of the 2014 Farm Bill (and the 2016 Agricultural Appropriations Act), procuring it from there is perfectly legal at the federal level. Kentucky’s ecology is perfect for hemp just as it is for tobacco. The growing season is longer than in Colorado, and the soil is richer, so the quality of the hemp and the yields are better.

6. What’s the percentage of cannabinoids and CBD in your product?

Our raw extracts have varying percentages of cannabinoid and cannabidiol (CBD) content, the range being 10%-99%. Each product has a unique formulation and uses varying ratios of our extract types. Our CBD Isolate is over 99% pure CBD.

7. What is the best method of use?

For our dietary supplements we can only recommend them for internal consumption. Our CBD isolate is for research purposes only. If you don’t like the flavor of the oil supplements, you can mix with something sweet like apple sauce or honey to cut through the flavor.

8. What’s the ideal serving size for me, and how often should I take it?

There is no easy answer to this. Our starting recommended serving size is 15 drops but we generally recommend experimenting to see what feels best to you. Some prefer 5 drops, some prefer over 50 drops per day.

9. What is the safety of your hemp extracts? Are there negative side effects?

Hemp is considered by many to be generally safe. We’ve never seen or heard of any significant or negative CBD Oil Extractside effects in our years in the industry. That said, we can’t rule them out. Please consult with your physician before using any dietary supplement including Hemp extract supplements.

10. Which of your CBD and hemp products should I get?

As a company who sells various dietary and food supplements, we can’t suggest any of our products for the prevention, treatment or cure of any disease or ailment.

When considering our different dietary hemp products, know that they all come in two strengths. Our Original Hemp blends (Classic Hemp Blend, Hemp Complete, Brainpower oil, & Signature Blend) all have 250+mg of cannabinoids per fluid ounce, and our concentrated blends have 1,500+mg per fluid ounce, six times the potency of our traditional oils. We’ve found that sometimes less is more, but nevertheless, some people like to take very large serving sizes of our hemp extracts.

The main difference between the four Original Blends is the additional herbal ingredients besides hemp. We suggest you research the separate components of each blend to determine which product may be most appealing to add to your dietary regimen. If you know it’s solely the hemp extract that you are looking for, with no additional ingredients, then Classic Hemp Blend or Classic Hemp 6x is what you’re looking for.

For dabbing and vaporizing or for research you can try our CBD Isolate.

THOSE WHO SUSPECT THEY MAY HAVE A DISEASE OR ARE SEEKING HELP FOR A DISEASE SHOULD CONSULT A QUALIFIED MEDICAL PROFESSIONAL.

11. Why do people use Hemp Extracts and CBD? What are the benefits and uses of CBD?

In accordance with federal regulations we cannot make health claims regarding our dietary supplement products. We can only recommend our products for general wellness.

12. Is a standard hemp seed oil the same as a high-CBD hemp extract?

Hemp Oil For Dogs

Hemp Oil For Dogs

Absolutely not. Standard hemp oil, which can be found very cheaply at a grocery store, is a much different product than our CO2 hemp extracts (not from seed). Standard hemp oil is produced by cold pressing the seeds, whereas our hemp extract is a supercritical CO2 extraction of the hemp plant itself, not the seeds. Hemp seed oil is considered to be a great nutritive food, but it doesn’t have the naturally occurring terpenes, cannabinoids and other components that our extracts do have.

13. Do I need to move to Colorado to get your Hemp Extracts and CBD? Where do you ship?

No. We actually source our hemp from Kentucky, as it’s legal to ship across state lines. Many people are under the impression that the only way to acquire hemp extracts and CBD for themselves or a loved one is to move to Colorado or another cannabis-friendly state. Many major news outlets are misinformed and are unfortunately spreading the idea that you can only get CBD oil in the states where medical marijuana has been legalized. This is simply not the case though. Because our extracts comes from hemp instead of marijuana, we can and do ship to all fifty states, and no medical marijuana card is needed. There are some exceptions, like with Indiana, Missouri and South Dakota we can’t sell our concentrated products due to state legislation.

We also ship to Japan, Australia, the EU, Switzerland, and Brazil. For all EU orders contact our exclusive distributor thereCannawell.

14. Is your Hemp Extract Oil similar to Rick Simpson Hemp Oil?

Not quite. Ours are from hemp and RSHO is usually using marijuana, a different form of cannabis than industrial hemp. Our industrial hemp extracts are more standardized and will usually have a much higher content of non-psychoactive cannabinoids like CBD than one produced through the Rick Simpson method. And oils produced through his method will usually have a much higher THC content, as it’s typically marijuana that is used for RSHO.†

Generally speaking, most marijuana producers and sellers (especially on the black market) don’t test for contaminants (metals, pesticides, bacteria, etc.). Rick Simpson Hemp Oil is actually more a method of extraction than it is a specific product. People use the Rick Simpson method with hundreds of different strains of marijuana, so the THC, CBD and other cannabinoid content of the final oil is always varying greatly, depending on the cannabis the consumers are acquiring. Usually what’s used for Rick Simpson oil is a strain with an inferior CBD content (and high THC), because that’s what the vast amount of marijuana is nowadays.

15. Where do you source your hemp and CBD from?

We have partners in Kentucky who grew a dedicated plot for us this year (2016) which is being used in our products now. mjna message boardWe also currently source from Europe but we’ll be changing that soon.

16. What kind of testing/analysis is performed on your products?

We have an industry leading quality control system, and we have third party laboratories analyze all of our hemp extracts and our final products for cannabinoid potency, heavy metals, bacterial and microbial life, mycotoxins (fungus), and pesticides.

17. What is CO2 extraction? What’s the difference between subcritical and supercritical CO2 extractions?

CO2 extraction is an extraction process that uses pressurized carbon dioxide to extract phyto-chemicals (such as CBD, CBG, or terpenes, flavonoids, etc.) from a plant. CO2 at certain temperatures and pressures acts like a solvent, without the dangers of actually being one. It is the most expensive extraction method, and is widely considered the most effective and safest plant extraction method in the world.

Many hemp and CBD companies boast about their supercritical CO2 extractions, but that’s actually only one (and perhaps an inferior) method of using a CO2 extraction machine. There are also subcritical CO2 extractions, and ‘mid-critical’, a general range between subcritical and supercritical. Subcritical (low temp, low pressure) CO2 extractions take more time and produce smaller yields than super-critical, but they retain the essential oils, terpenes, and other sensitive chemicals within the plant. Supercritical, on the other hand, is a high pressure and high temperature process that damages most terpenes and heat sensitive chemicals, but can extract much larger molecules such as lipids (omega 3 and 6), chlorophyll, and waxes. A truly full-spectrum CO2 extract includes first performing a subcritical extraction, separating the extracted oil, and then extracting the same plant material using supercritical pressure, and then homogenizing both oil extracts into one. In the essential oil industry, an extract made using this specific process is referred to as a CO2 Total.

18. What is the endocannabinoid system (ECS)?

“The endocannabinoid system (ECS) is a group of endogenous cannabinoid receptors located in the mammalian brain and throughout the central and peripheral nervous systems, consisting of neuromodulatory lipids and their receptors.” Wikipedia

There are two main types of receptors in the ECS, CB1 and CB2. CB1 receptors are primarily located in the central nervous system and brains of mammals, and CB2 are generally found in the peripheral nervous system. There are two main cannabinoids mammals produce- 2AG and Anandamide (named after the Sanskrit term “ananda” which translates to “peace”).

For hundreds of millions of years every vertebrate on Earth has been equipped with this ECS, a crucial system in the body, and it has been known about in the scientific and medical communities since the 1980’s. However, it’s still not taught about in most medical schools.

Comments

comments