For years we have heard about and sometimes experienced, white powdery mildew when growing cannabis. It is a problem we can see, and we have numerous ways to combat it. But now more and more states are introducing regulatory testing on our harvests and they are looking for harmful substances like Escherichia coli., Aspergillis Fumigatus, Aspergillis terreus, …  just to name a few. Mycotoxins, mold and bacteria can render a harvest unusable and even unsellable- and you can’t see these problems with the naked eye. How much would it cost you to have to throw away an entire crop?

You bring in equipment to control the humidity. You treat the soil and create just the right amount of light to grow a superior product. You secure and protect the growing, harvesting, drying and production areas of your facility. You do everything you can to secure a superior yield… but do you?

Many of the organisms that can hurt our harvest are being multiplied, concentrated and introduced to the plants by the very equipment we use to control the growing environment. This happens inherently in HVAC equipment.

Your air conditioning equipment cools the air circulating around your harvest in a process that pulls moisture from the air and creates a perfect breeding ground in the wet cooling coil for growth of many of the organisms that can destroy your yield. As these organisms multiply and concentrate in the HVAC system, they then spew out into the very environment you are trying to protect at concentrated levels far greater than outside air. In effect, you are inoculating the very plants you need to keep safe from these toxins if you want to sell your product.

The cannabis industry is starting to take a page from the healthcare and food safety industries who have discovered the best way to mitigate these dangers is the installation of a proper UVC solution inside their air conditioning equipment.

Why? How does UVC help? What is UVC?

What is Ultraviolet?

Ultraviolet (UV) light is one form of electromagnetic energy produced naturally by the sun. UV is a spectrum of light just below the visible light and it is split into four distinct spectral areas – Vacuum UV or UVV (100 to 200 nm), UVC (200 to 280 nm), UVB (280 to 315 nm) and UVA (315 to 400 nm). UVA & UVB have been used in the industry to help promote growth of cannabis.

What is UVC (Ultraviolet C)?

The entire UV spectrum can kill or inactivate many microorganism species, preventing them from replicating. UVC energy at 253.7 nanometers provides the most germicidal effect. The application of UVC energy to inactivate microorganisms is also known as Germicidal Irradiation or UVGI.

UVC exposure inactivates microbial organisms such as mold, bacteria and viruses by altering the structure and the molecular bonds of their DNA (deoxyribonucleic acid). DNA is a “blue print” these organisms use to develop, function and reproduce. By destroying the organism’s ability to reproduce, it becomes harmless since it cannot colonize. After UVC exposure, the organism dies off leaving no offspring, and the population of the microorganism diminishes rapidly.

Ultraviolet germicidal lamps provide a much more powerful and concentrated effect of ultraviolet energy than can be found naturally. Germicidal UV provides a highly effective method of destroying microorganisms.

To better understand how Steril-Aire UVC works, it is important to understand the recommended design. Directed at a cooling coil and drain pan, UVC energy destroys surface biofilm, a gluey matrix of microorganisms that grows in the presence of moisture. Biofilm is prevalent in HVAC systems and leads to a host of indoor air quality (IAQ) and HVAC operational problems. UVC also destroys airborne viruses and bacteria that circulate through an HVAC system and feed out onto the crop. HVAC cooling coils are the largest reservoir and amplification device for microorganisms in any facility.

For the most effective microbial control, UV germicidal Emitters are installed on the supply side of the system, downstream from the cooling coil and above the drain pan. This location provides more effective biofilm and microbial control than in-duct UVC installations. By irradiating the contaminants at the source – the cooling coils and drain pans – UVC delivers simultaneous cleaning of surface microorganisms as well as destruction of airborne microorganisms and mycotoxins. Steril-Aire patented this installation configuration in 1998.

The recirculating air in HVAC systems create redundancy in exposing microorganisms and mycotoxins to UVC, ensuring multiple passes so the light energy is effective against large quantities of airborne mycotoxins and cleaning the air your plants live by.

Where are these mycotoxins coming from?

Aspergillus favors environments with ample oxygen and moisture. Most pre-harvest strategies to prevent these mycotoxins involve chemical treatment and are therefore not ideal for the cannabis industry.

Despite the lack of cannabis protocols and guidelines for reducing mycotoxin contamination, there are some basic practices that can be utilized from other agricultural groups that will help avoid the production of aflatoxins and ochratoxins.

When guidelines are applied correctly to the cannabis industry, the threat of aflatoxin and ochratoxin contamination can be significantly reduced. The place to start is a clean air environment.

Design to win

The design of indoor grow rooms for cannabis is critical to the control of airborne fungal spores and although most existing greenhouses allow for the ingress of fungal spores, experience has shown that they can be retrofitted with air filters, fans, and UVC systems to make them relatively free of these spores. Proper designs have shown clearly that:

  1. Prevention via air and surface disinfection using germicidal UVC is much better than chemical spot treatment on the surface of plants
  2. High levels of air changes per hour enhance UVC system performance in reducing airborne spores
  3. Cooling coil inner surfaces are a hidden reservoir of spores, a fertile breeding ground and constitute an ecosystem for a wide variety of molds. Continuous UVC surface decontamination of all coils should be the first system to be installed in greenhouses to reduce mildew outbreaks.

UVC can virtually eliminate airborne contaminants

Steril-Aire graphic 4

Steril-Aire was the first and is the market leader in using UVC light to eliminate mold and spores to ensure your product will not be ruined or test positive.

  1. Mold and spores grow in your air handler and are present in air entering your HVAC system.
  2. Steril-Aire UVC system installs quickly and easily in your existing system.
  3. The Steril-Aire UVC system destroys up to 99.999% of mold/spores.
  4. Plants are less likely to be affected by mold…with a low cost and no down time solution.

It’s time to protect your harvest before it gets sick. It’s time to be confident your yield will not test positive for the contaminants that will render it unusable. It’s time to win the testing battle. It’s time for a proper UVC solution to be incorporated throughout your facilities.

The post Keeping Your Environment Clean: Preventative Measures Against Contamination appeared first on Cannabis Industry Journal.

CBD Oils | Growing Cannabis | CBD For Anxiety | CBD Oil Benefits | CBD Oils Cancer Fighting | Effects of CBD Oil | CBD Oil For Pain | CBD Oil For Pain | Vape Pens | Vape Pen Starter Kit | Vaporite Pen | Vapir Pen | Vapen | Sutra Pen | Pulsar Pen | Pax Pen | Kandy Pens | Greco Science Pens | Exxus Pens | Dr Dabber Pens | Dipstick Pens | Davinci Pens | Atmos Pens | Arizer Pens | Zephyr Pens | White Rhino Pens | Volcano Pens | Viva La Vape Pens |  

1. What is CBD? What is CBD Oil?

Cannabidiol (CBD) is a naturally occurring constituent of industrial hemp/cannabis. Its formula is C21H30O2 and it has a molecular mass of 314.4636. It is the most abundant non-psychoactive cannabinoid found in cannabis, and is being scientifically investigated for various reasons.

CBD oil is a cannabis oil (whether derived from marijuana or industrial hemp, as the word cannabis is the latin genus name for both) that has significant amounts of cannabidiol (CBD) contained within it. Our CBD products and extracts are derived from industrial hemp, so they could be considered CBD-rich hemp oil, hemp derived CBD oil, CBD-rich cannabis oil, or plainly “hemp extracts” since they typically contain much more than just CBD. Again, cannabis doesn’t mean marijuana, but is the genus name, and general umbrella term which all forms of marijuana and hemp fall under. The form of cannabis we use for our CBD and hemp extracts is industrial hemp; we do not sell marijuana.

2. If a hemp extract is 40% cannabinoids, what’s the other 60%? What’s in your hemp extracts besides the naturally occurring cannabinoids?

Our Kentucky hemp extracts contain over 80 different phyto-cannabinoids such as cannabidiol (CBD), CBC, CBG, CBN, etc.. In addition to the cannabinoids naturally present in our agricultural hemp extracts, there are also many other types of natural molecules and phyto-chemical compounds such as amino acids, carbohydrates, vitamins (including B1, B2, B6, D), fatty acids (including omega 3 & 6), trace minerals (including iron, zinc, calcium, magnesium, potassium), beta-carotene, chlorophyll, flavanoids, ketones, nitrogenous compounds, alkanes, glycosides, pigments, water, and terpenes. The most common terpenes in our hemp extracts are Myrcene, Beta-caryophyllene, Terpinolene, Linalool, alpha-Pinene, beta-Pinene, Nerolidol og Phytol, trans-alpha-Bergamotene, Limonene/ beta-Phellandrene (Co-elution), and alpha-Humulene.

3. What’s the difference between Hemp and Marijuana?

Scientifically, industrial Hemp and Marijuana are the same plant, with a genus and species name of Cannabis Sativa. They have a drastically different genetic profile though. Industrial Hemp is always a strain of Cannabis sativa, while marijuana can be Cannabis sativa, Cannabis indica, or Cannabis ruderalis. The major difference is how industrial hemp has been bred compared to a marijuana form of Cannabis sativa. organic hemp seedsTypically speaking, industrial hemp is very fibrous, with long strong stalks, and barely has any flowering buds, while a marijuana strain of Cannabis sativa will be smaller, bushier, and full of flowering buds. However, newer industrial hemp varieties in the USA are being bred to have more flowers and higher yields of cannabinoids and terpenes, such as our Kentucky hemp we’re now using!

99% of the time marijuana has a high amount of THC and only a very low amount of CBD. Hemp, on the other hand, naturally has a very high amount of CBD in most instances, and only a trace amount of THC. Fortunately, the cannabinoid profile of hemp is ideal for people looking for benefits from cannabis without the ‘high.’ Hemp is used for making herbal supplements, food, fiber, rope, paper, bricks, oil, natural plastic, and so much more, whereas marijuana is usually used just recreationally, spiritually, and medicinally. The term cannabis oil can refer to either a marijuana or hemp derived oil, since marijuana and hemp are two different forms of cannabis.

In the USA the legal definition of “industrial hemp,” per Section 7606 of the Agricultural Appropriations Act of 2014, is “INDUSTRIAL HEMP — The term ‘‘industrial hemp’’ means the plant Cannabis sativa L. and any part of such plant, whether growing or not, with a delta-9 tetrahydrocannabinol concentration of not more than 0.3 percent on a dry weight basis.”

4. Are hemp derived cannabinoids such as CBD as good as CBD from marijuana?

The short answer is yes. CBD is CBD, whether from marijuana or hemp. Most marijuana has a very low non-psychoactive cannabinoid profile (like CBD, CBC, CBG), so most of the time hemp would be much more preferable for anything besides THC. Marijuana is usually very high in THC (gives people the high) but usually very low in other non-psychoactive cannabinoids.

Nowadays in the USA, many farmers are growing industrial hemp flowers that are just as beautiful, odor-producing, and terpene rich as the best marijuana strains, such as our partnered farmers in Kentucky.

5. Why don’t you source your Hemp and CBD from within Colorado?

colorado growing operationWe feel that the hemp program in Kentucky is more well suited for our company in regards to growing hemp, and that because it’s 100% compliant with Section 7606 of the 2014 Farm Bill (and the 2016 Agricultural Appropriations Act), procuring it from there is perfectly legal at the federal level. Kentucky’s ecology is perfect for hemp just as it is for tobacco. The growing season is longer than in Colorado, and the soil is richer, so the quality of the hemp and the yields are better.

6. What’s the percentage of cannabinoids and CBD in your product?

Our raw extracts have varying percentages of cannabinoid and cannabidiol (CBD) content, the range being 10%-99%. Each product has a unique formulation and uses varying ratios of our extract types. Our CBD Isolate is over 99% pure CBD.

7. What is the best method of use?

For our dietary supplements we can only recommend them for internal consumption. Our CBD isolate is for research purposes only. If you don’t like the flavor of the oil supplements, you can mix with something sweet like apple sauce or honey to cut through the flavor.

8. What’s the ideal serving size for me, and how often should I take it?

There is no easy answer to this. Our starting recommended serving size is 15 drops but we generally recommend experimenting to see what feels best to you. Some prefer 5 drops, some prefer over 50 drops per day.

9. What is the safety of your hemp extracts? Are there negative side effects?

Hemp is considered by many to be generally safe. We’ve never seen or heard of any significant or negative CBD Oil Extractside effects in our years in the industry. That said, we can’t rule them out. Please consult with your physician before using any dietary supplement including Hemp extract supplements.

10. Which of your CBD and hemp products should I get?

As a company who sells various dietary and food supplements, we can’t suggest any of our products for the prevention, treatment or cure of any disease or ailment.

When considering our different dietary hemp products, know that they all come in two strengths. Our Original Hemp blends (Classic Hemp Blend, Hemp Complete, Brainpower oil, & Signature Blend) all have 250+mg of cannabinoids per fluid ounce, and our concentrated blends have 1,500+mg per fluid ounce, six times the potency of our traditional oils. We’ve found that sometimes less is more, but nevertheless, some people like to take very large serving sizes of our hemp extracts.

The main difference between the four Original Blends is the additional herbal ingredients besides hemp. We suggest you research the separate components of each blend to determine which product may be most appealing to add to your dietary regimen. If you know it’s solely the hemp extract that you are looking for, with no additional ingredients, then Classic Hemp Blend or Classic Hemp 6x is what you’re looking for.

For dabbing and vaporizing or for research you can try our CBD Isolate.

THOSE WHO SUSPECT THEY MAY HAVE A DISEASE OR ARE SEEKING HELP FOR A DISEASE SHOULD CONSULT A QUALIFIED MEDICAL PROFESSIONAL.

11. Why do people use Hemp Extracts and CBD? What are the benefits and uses of CBD?

In accordance with federal regulations we cannot make health claims regarding our dietary supplement products. We can only recommend our products for general wellness.

12. Is a standard hemp seed oil the same as a high-CBD hemp extract?

Hemp Oil For Dogs

Hemp Oil For Dogs

Absolutely not. Standard hemp oil, which can be found very cheaply at a grocery store, is a much different product than our CO2 hemp extracts (not from seed). Standard hemp oil is produced by cold pressing the seeds, whereas our hemp extract is a supercritical CO2 extraction of the hemp plant itself, not the seeds. Hemp seed oil is considered to be a great nutritive food, but it doesn’t have the naturally occurring terpenes, cannabinoids and other components that our extracts do have.

13. Do I need to move to Colorado to get your Hemp Extracts and CBD? Where do you ship?

No. We actually source our hemp from Kentucky, as it’s legal to ship across state lines. Many people are under the impression that the only way to acquire hemp extracts and CBD for themselves or a loved one is to move to Colorado or another cannabis-friendly state. Many major news outlets are misinformed and are unfortunately spreading the idea that you can only get CBD oil in the states where medical marijuana has been legalized. This is simply not the case though. Because our extracts comes from hemp instead of marijuana, we can and do ship to all fifty states, and no medical marijuana card is needed. There are some exceptions, like with Indiana, Missouri and South Dakota we can’t sell our concentrated products due to state legislation.

We also ship to Japan, Australia, the EU, Switzerland, and Brazil. For all EU orders contact our exclusive distributor thereCannawell.

14. Is your Hemp Extract Oil similar to Rick Simpson Hemp Oil?

Not quite. Ours are from hemp and RSHO is usually using marijuana, a different form of cannabis than industrial hemp. Our industrial hemp extracts are more standardized and will usually have a much higher content of non-psychoactive cannabinoids like CBD than one produced through the Rick Simpson method. And oils produced through his method will usually have a much higher THC content, as it’s typically marijuana that is used for RSHO.†

Generally speaking, most marijuana producers and sellers (especially on the black market) don’t test for contaminants (metals, pesticides, bacteria, etc.). Rick Simpson Hemp Oil is actually more a method of extraction than it is a specific product. People use the Rick Simpson method with hundreds of different strains of marijuana, so the THC, CBD and other cannabinoid content of the final oil is always varying greatly, depending on the cannabis the consumers are acquiring. Usually what’s used for Rick Simpson oil is a strain with an inferior CBD content (and high THC), because that’s what the vast amount of marijuana is nowadays.

15. Where do you source your hemp and CBD from?

We have partners in Kentucky who grew a dedicated plot for us this year (2016) which is being used in our products now. mjna message boardWe also currently source from Europe but we’ll be changing that soon.

16. What kind of testing/analysis is performed on your products?

We have an industry leading quality control system, and we have third party laboratories analyze all of our hemp extracts and our final products for cannabinoid potency, heavy metals, bacterial and microbial life, mycotoxins (fungus), and pesticides.

17. What is CO2 extraction? What’s the difference between subcritical and supercritical CO2 extractions?

CO2 extraction is an extraction process that uses pressurized carbon dioxide to extract phyto-chemicals (such as CBD, CBG, or terpenes, flavonoids, etc.) from a plant. CO2 at certain temperatures and pressures acts like a solvent, without the dangers of actually being one. It is the most expensive extraction method, and is widely considered the most effective and safest plant extraction method in the world.

Many hemp and CBD companies boast about their supercritical CO2 extractions, but that’s actually only one (and perhaps an inferior) method of using a CO2 extraction machine. There are also subcritical CO2 extractions, and ‘mid-critical’, a general range between subcritical and supercritical. Subcritical (low temp, low pressure) CO2 extractions take more time and produce smaller yields than super-critical, but they retain the essential oils, terpenes, and other sensitive chemicals within the plant. Supercritical, on the other hand, is a high pressure and high temperature process that damages most terpenes and heat sensitive chemicals, but can extract much larger molecules such as lipids (omega 3 and 6), chlorophyll, and waxes. A truly full-spectrum CO2 extract includes first performing a subcritical extraction, separating the extracted oil, and then extracting the same plant material using supercritical pressure, and then homogenizing both oil extracts into one. In the essential oil industry, an extract made using this specific process is referred to as a CO2 Total.

18. What is the endocannabinoid system (ECS)?

“The endocannabinoid system (ECS) is a group of endogenous cannabinoid receptors located in the mammalian brain and throughout the central and peripheral nervous systems, consisting of neuromodulatory lipids and their receptors.” Wikipedia

There are two main types of receptors in the ECS, CB1 and CB2. CB1 receptors are primarily located in the central nervous system and brains of mammals, and CB2 are generally found in the peripheral nervous system. There are two main cannabinoids mammals produce- 2AG and Anandamide (named after the Sanskrit term “ananda” which translates to “peace”).

For hundreds of millions of years every vertebrate on Earth has been equipped with this ECS, a crucial system in the body, and it has been known about in the scientific and medical communities since the 1980’s. However, it’s still not taught about in most medical schools.

Comments

comments